Pipe Bursting in Lewis Park

What fails under Lewis Park homes

Southeastern homes built through the 1970s commonly have cast iron drain lines under slab foundations and clay or Orangeburg laterals to the street. Cast iron in this region corrodes quickly; it is not unusual for a camera to find the bottom of the pipe completely gone under a slab.

High water tables, sandy or heavy-clay soils depending on the area, hurricane and storm saturation, and year-round root growth from live oaks and other fast-growing trees all shorten the life of a jointed lateral. Open trenches fill with groundwater on many lots.

Trenchless work sidesteps the water table and the slab. Lining rebuilds corroded cast iron in place; bursting replaces a collapsed run with jointless HDPE that roots cannot enter.

How pipe bursting works

A steel cable is threaded through the old sewer line from a pit at one end to a pit at the other. A cone-shaped bursting head, with new high-density polyethylene pipe fused to it, is pulled through by a hydraulic unit. The head splits the old clay or cast iron outward into the soil and the new pipe follows in the same alignment at the same depth. The result is a single fused length of pipe with no joints for roots to find.

When bursting is the right call

• Collapsed sections — a liner needs a host pipe to hold its shape; a collapsed run has none.
• Bellies — a low spot that holds water stays a low spot after lining. Bursting lays new pipe on a fresh bed.
• Undersized lines — bursting can upsize a 3-inch lateral to 4 inches; lining slightly reduces diameter.
• Badly deformed pipe — Orangeburg that has flattened, or cast iron with most of its bottom gone.

What the job looks like

One pit at the house or cleanout, one at the property line or the street connection, each a few feet square. Utilities that cross within a foot or two of the sewer path are located and potholed first. The pull takes an hour or two; the whole job, including fusing, connections, inspection and backfill, is usually one day.

Permits and the street

If the downstream pit is in the sidewalk, parkway or street, a right-of-way permit and restoration to city standards are required in addition to the plumbing permit. If the connection at the main is replaced, the city inspects it before the pit closes. Confirm who is handling this before work starts.

Getting it done in Lewis Park

A camera inspection maps the line and marks every defect on the ground with its depth. The line is cleaned with a hydro jetter so the pipe wall can be seen and, if it is being lined, so the resin bonds to clean pipe. Lining works from the cleanout at the house; bursting needs a small pit at each end of the run. Either way the yard, driveway and slab in between are never opened. Most residential jobs in Lewis Park finish in a day, and you should receive the before-and-after footage as part of the job.

Permits are part of it. Lateral work in Lewis Park normally needs a plumbing permit, and anything in the sidewalk, parkway or street needs a right-of-way permit as well. The contractor pulls those and schedules the inspection; if a quote does not mention them, ask.

Finding the right contractor in Lewis Park

Lewis Park does not have a CIPP Verified installer assigned yet. The curedinplacepipe.net directory lists vetted lining contractors by state. The form below and (877) 880-8125 both reach our network directly; we match the request with a qualified contractor covering Lewis Park. Estimates are free. Call now.

More trenchless services in Lewis Park

Questions we hear in Lewis Park